Connections Manager; Task Tab - Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual

Connections Manager

The connections manager sets up various network connections to Internet Service Providers (ISPs) via
external modem.
To open the connections manager, tap Start > Settings > Connections tab > Connections icon
Server-Assigned IP Addresses
Zero-Config Wi-Fi

Task Tab

The Task tab enables you to initially configure, then manage network settings when using a modem.
Select an item in this list and then complete the setup screens that follow with the appropriate information
for your network.
My ISP
The links under this heading enables you to add and manage modem connections to an ISP. To complete
the setup screens, obtain the following information from your ISP:
• ISP dial-up access telephone number
• Username
• Password
• TCP/IP settings
My Work Network
These links enable you to establish the following connections types:
• Modem
• Virtual Private Network (VPN)
• Proxy server connection
To complete the setup screens, obtain the network parameters from your system administrator.
7 - 4
Downloaded from www.Manualslib.com
All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).
The zero-config Wi-Fi feature of Windows Mobile is disabled on Dolphin 7600 terminals.
If you are using one of the on-board wireless radios to connect to a network, do not enter
network parameters in the connections manager. The Dolphin terminal uses the radio's
settings to connect to the network.
manuals search engine
Rev A
5/23/2008
Dolphin® 7600 Mobile Computer
User's Guide
.