Advanced Features
Troubleshooting for Anynet+
The TV Program cannot be
recorded.
The TV sound is not output
•
Connect the optical cable between TV and the receiver.
through the receiver.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-OEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
If connection is terminated because there has been a power interruption or the HDMI cable has beers
disconnected, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
2
English