Listening Through A Receiver (Home Theater); Troubleshooting For Anynet - Samsung 450 Series User Manual

Listening through a Receiver (Home theater)

You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER E button to select Anynet + (HDMI-CEC).
. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
If your receiver supports audio only, it may not appear in the device list.
N
When listening through the receiver, there are restrictions for using the PIP and audio-related (Multi-Track
N
Sound, Preferred language) menus.
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power
N
cord or a power failure), the Select Speaker may be set to External Speaker when you turn the TV on
again.

Troubleshooting for Anynet +

Symptom
Anynet + does not work.
I want to start Anynet + .
I want to exit Anynet + .
The message Connecting to
Anynet+ device...
appears on the screen.
The Anynet + device does not
play.
The connected device is not
displayed.
The TV program cannot be
recorded.
Solution
Check if the device is an Anynet + device. The Anynet + system supports Anynet + devices only.
•
• Connect only one receiver (home theater).
Check if the Anynet + device power cord is properly connected.
•
Check the Anynet + device's Video/Audio/HDMI 1.3 cable connections.
•
Check whether Anynet + (HDMI-CEC) is set to On in the Anynet + setup menu.
•
• Check whether the TV remote control is in TV mode.
Check whether it is Anynet + exclusive remote control.
•
Anynet + doesn't work in certain situations. (Searching channels, Plug & Play, etc.)
•
• When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
or turn your TV off and on again.
Check if the Anynet + Function of Anynet + device is set on.
•
Check if the Anynet + device is properly connected to the TV and check if the Anynet +
•
(HDMI-CEC) is set to On in the Anynet + Setup menu.
• Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button
to show the Anynet + menu and select a menu you want.
Select View TV in the Anynet + menu.
•
Press the SOURCE button on the TV remote control and select a device other than Anynet +
•
devices.
(Note that the channel button operates only when a tuner-embedded Anynet + device is not
•
connected.)
You cannot use the remote control when you are configuring Anynet + or switching to a view
•
mode.
Use the remote control when the Anynet + setting or switching to view mode is complete.
•
• You cannot use the play function when Plug & Play is in progress.
Check whether or not the device supports Anynet + functions.
•
• Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet + (HDMI-CEC) is set to On in the Anynet + setup menu.
•
Search Anynet + devices again.
•
You can connect an Anynet + device using the HDMI 1.3 cable only. Some HDMI cables may
•
not support Anynet + functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
cord or a power failure, please repeat the device scan.
• Check whether the antenna jack on the recording device is properly connected.
English - 
TV P 1 55
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
Move Enter
Return