Download  Print this page

Recording; Listening Through A Receiver - SAMSUNG Series 5+ 540 User Manual

Hide thumbs


You can make a recording of a TV Program using a Samsung recorder.
Select Recording,
When there are more than two recording devices
. When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
When the recording device is not displayed, select Device List and press the Red button to search devices.
Press the EXIT button to exit.
You can record the source streams by selecting Recording:
Pressing the [_q (REO) button will record whatever you are currently watching, If you are watching video from
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the 1'7 Speaker.
Select Receiver and set to On.
Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
" You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
" The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
" The Anynet+ functions do not operate with other manufacturers' products.
English 41


Table of Contents

This manual is also suitable for:

Series 5+ 550Series 5+ 590Series 5+ 540Series 5+ 550

Comments to this Manuals

Symbols: 0
Latest comments: