Samsung Series 5+ 540 User Manual page 49

The Tk/turns off automatically. • Ensure the Sleep Timer is set to Off in the Setup menu (p. 21).
• If your PC is connected to the T_, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the T_
• When watching TV from an antenna or cable connection, the TVwill turn off after 10 - 15 minutes if
there is no signal.
There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the Tk/and external
devices).
• Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections
to the TV input. For example, if an external device's output is HDMI, it should be connected to an
HDMI input on the TkL
• Make sure your connected devices are powered on.
• Be sure to select the TV's correct source by pressing the SOURCE button on the remote control.
• Reboot the connected device by reconnecting the device's power cane.
RF(Cable/Antenna)Connection
The Tk/is not receiving all channels. • Make sure the coaxial cable is connected securely.
• Please try Auto Program to add available channels to the channel list. Go to MENU - Channel -
Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu.
There are 3 options (STD, HRC and IRC) (p. 15).
• Verify the Antenna is positioned correctly.
No Caption on digital channels. • Check Caption Setup menu. Try changing Caption Mode Service1 to OO1 to (p. 24).
• Some channels may not have caption data.
The picture is distorted: macro block error, • Compression of video contents may cause picture distortion, especially with fast moving pictures
small block, dots, pixelization, such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV problem.
PC Connection
A "Mode Not Supported" message • Set your PC's output resolution so it matches the resolutions supported by the Tk/(p. 12).
appears.
"PC" is always shown on the source list, • This is normal; "PC" is always shown on the source list, regardless of whether a PC is connected.
even if a PC is not connected.
The video is OK but there is no audio. • If you are using an HDMI connection, check the audio output setting on your PC.
Network Connection
Wireless network connection failure. • The Samsung Wireless USB dongle is required to use a wireless network.
• Make sure Network Connection is set to Wireless (p. 29).
• TV must be connected to a wireless IPsharer (router).
Software Upgrade over the network fails. • Try network test in Setup menu (p. 24).
• If you have latest SW version, SW upgrade will not proceed.
Others
Purple/green rolling horizontal bars and • Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates
buzzing noise from the TV speakers with that the set-top-box has a grounding issue. Replace the Component video cables with an HDMI
Component cable connection, connection.
The picture won't display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from
your TkL
• Adjust the picture size options on your external device or TVto full screen.
The remote control does not work. • Replace the remote control batteries with correct the poles (+/-) in the right direction.
• Cleanthe sensor's transmission window on the remote.
• Try pointing the remote directly at the TV from 5.46 feet away.
Eog,,sh 49