Download  Print this page

Troubleshooting For Anynet - Samsung PS50B859 User Manual

Hide thumbs

Advertisement

Table of Contents

Troubleshooting for Anynet

Symptom
Anynet + does not work.
I want to start Anynet + .
I want to exit Anynet + .
The message Connecting to
Anynet+ device...
appears on the screen.
The Anynet + device does not
play.
The connected device is not
displayed.
The TV programme cannot be
recorded.
The TV sound is not output
through the receiver.
+
Solution
Check if the device is an
Connect only one receiver (home theater).
Check if the
Anynet
device power cord is properly connected.
+
Check the
Anynet
device's Video/Audio/HDMI 1.3 cable connections.
+
Anynet
Check whether
+
Check whether the TV remote control is in TV mode.
Check whether it is
Anynet
Anynet+ doesn't work in certain situations. (Searching channels, Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
or turn your TV off and on again.
Check if the
Anynet
Function of Anynet+ device is set on.
+
Check if the Anynet
device is properly connected to the TV and check if the Anynet
+
(HDMI-CEC) is set to On in the Anynet
Press the
TV button on the TV remote control to switch to TV. Then press the TOOLS button
to show the Anynet
menu and select a menu you want.
+
Select
View TV in the Anynet
Press the
SOURCE button on the TV remote control and select a device other than Anynet
devices. (Note that the channel button operates only when a tuner-embedded Anynet+ device
is not connected.)
You cannot use the remote control when you are configuring Anynet+ or switching to a view
mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
You cannot use the play function when
Check whether or not the device supports
Check whether or not the HDMI 1.3 cable is properly connected.
Anynet
Check whether
+
Search
Anynet
devices again.
+
You can connect an
Anynet
not support Anynet
functions.
+
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
cord or a power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
Connect the optical cable between TV and the receiver.
English - 48
Anynet
device. The Anynet
+
+
(HDMI-CEC) is set to On in the Anynet+ setup menu.
exclusive remote control.
+
Setup menu.
+
menu.
+
Plug & Play is in progress.
Anynet
functions.
+
(HDMI-CEC) is set to On in the Anynet
device using the HDMI 1.3 cable only. Some HDMI cables may
+
system supports Anynet
devices only.
+
setup menu.
+
+
+

Advertisement

Chapters

Table of Contents

This manual is also suitable for:

Ps58b859

Comments to this Manuals

Symbols: 0
Latest comments: