Table of Contents
Advertisement
Usinq the Remote Control to Choose On-screen Menu items
Press the MENU button
to bring up the Main Menu. To select an on-semen item, use the up and down
arrow buttons on the remote control
Selecting a menu item can take you to another menu, activate a
choice, or activate a data entry field (such as the hour field in the CLOCK menu).
If a number doesn't appear next to an on-screen menu, use the arrow buttons to highlight
an item on
the screen, and press OK to select the highlighted
item.
[_
CLOCK
[_
PROGRAM
TUNING
SETUP
Complete
the VCR setup_
To set up the VCR,you'll need to set a few important menu
items the fhst t[meyou turn on the unit.
mis is the VCR Main menu,
TUNING
BAND:
TV
CH.
ADD/DEL:
CH, 2
ADD
SOURCE
SELECT:
TUNER
Auto Channel Search
Before you can watch channels through the VCR, you must
set the type of signal you have ((table or TV) and search for
all available eharmels.
1. Press MENU to display theVCR Main Menu.
2. Press the down alrow button
until TUNING is
highlighted,
and press OK (the Tuning menu appears).
3. Press the down alrow button
until TUNING BAND: is
highlighted,
and pless the right arrow button
until the
type of signal you have is shown (CATVor TVJ.
4. Press the up arrow button
until AUTO CHANNEL SETis
highlighted,
and press the right arrow button
(auto
channel search stalts).
This may take several seconds.
When finished, youl available channels appear. To add or
delete any channels, see page 33.
10
Chapter 1
Advertisement
Table of Contents
