Table of Contents
Advertisement
MONTHJANUARY
DAY
1
WED
YEAR
2003
TIME
12 : 00 AM
o
o
o
DAYLIGHT
SAVING:
AUTO
TIME ZONE:
AUTO
Note: If Auto Clock Set receives the
wronq time or dote intormotion,
you
rn_y need to set tke doe/< monu_/ly
Time
and Date
The VCR gives you two ways to set the time and date: the
Auto Clock Set feature or manually.
Auto Clock Set
Auto Clock Set searches for day/time
information
automatically
through the broadcast signal.
1. Press MENU to display theVCR Main Menu.
2.
CLOCK should aheady be highlighted,
so press OK (the
Clock menu appears).
3. AUTO CLOCK SET: should aheady be set to ON. If it's not,
use the arrow buttons to highlight
it and then press the
right alrow button
to choose ON.
4. Press the down alrow button
until DAYHOHTSAVtNO:
is
highlighted,
and press the right arrow button
until the
desired setting is shown (AUTO, ON, or OFF).
® If you choose AUTO, the VCR sets the clock using the
DST information
from the broadcast signal.
o
If you choose ON, theVCR adjusts the clock when the
Daylight Savings Time begins or ends.
5. Press the down alrow button to highlight
TIMEZONE,
and press the right arrow button
until your time zone is
shown [AUTO, EASTERN, CENTRAL, MOUNTAIN, PACtF/C,
ALASKA, ol HAWAII).
® If you choose AUTO, the VCR sets the time zone using
information
from the broadcast signal.
6, When finished, press MENU to exit,
7. Turn off the \/CR to automat[eally
set the cloek.
Chapter 1
11
Advertisement
Table of Contents
