Auto Clock Set Feature - ProScan PSVR75 User Manual

AUTO CLOCK SET FEATURE
The Auto Clock feature is set to ON at the factory. There are certain
steps that are required, such as Auto Channel Search, setting the
Time Zone, and setting the Daylight-Savings feature, before the
Auto Clock feature works.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
I VCR Plus+
2 Timer Recordings
_Am.n
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 3 to display the TIME menu.
k_ii iillll:] ;;:]ll"
.
TIME
I Set Time and Date
2 Auto Clock Set: ON
4 Set Daylight Savings
0 Exit
Press 3 to display the SET TIME ZONE screen,
SET TIME ZONE
What is your Time Zone?
I Eastern
2 Central
3 Mountain
4 Pacific
5 Alaska
6 Hawaii
llllr.l|l
Press MENU to continue
4. Select your time zone.
If you select Automatic for your time zone, the VCR sets the
clock using the first Coordinated Universal Time information it
finds. If the time is not correct, select another time zone or set
the time and date through the menu system.
Auto Clock Info
V_4th a cable box, the VCR will not reset
the clock after a power outage unless th
cable box is set to the channel carrying
the broadcast signal.
If Auto Clock Set is unsuccessful, try
tuning the VCR (or cable box) to a
channel carrying Extended Data Service
(XDS) information (usually PBS), then
turn the VCR off. If the time does not se
within I 0 minutes, set the time and date
manually through theii_e menu.
Check local cable system or TV stations
for availability of channels with XDS
information.
17