ProScan PSVR75 User Manual page 13

SETUP FOR A DIGITAL
SATELLITE RECEIVER
With this setup, the VCR turns on an RCA, ProScan, or GE satellite
receiver antenna and tunes it to the desired channel at the start time of
a timer recording. For other brands, the VCR tunes the receiver to the
desired channel only if the receiver is turned on. Position the satellite
receiver above the VCR as shown in the Connections section.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
I VCR Plus+
2 Timer Recordings
3 Time
[; I!;-. Illl;I _1 I_
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 4 to display CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove ChanneLs
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
I
0 Exit
3. Press 6 to select SAT SETUP.
4.
SAT SETUP
On what channel does
the VCR receive signals
from the SAT receiver?
Enter 01-125 or INPUT
Press MENU to cancel
Enter the output channel of your satellite receiver, usually 03, 04,
or video line input and press MENU. The VCR confirms that it
receives all DSS signals on the specified channel.
Satellite Viewing Channels
Even though you are offered channels I-
125, most modern satellite systems can
only broadcast to channels 3, 4 or
INPUTIt is highly recommended that
you chose one of these three numbers fi
your satellite systembroadcast.
11