Zero Search; Pro-Tect Plus Tm Locking; Tracking - ProScan PSVR75 User Manual

ZERO SEARCH
The Zero Search feature enables the VCR to quickly return to a counter
reading of 0:00:00 anywhere on the tape. This is especially convenient
when you want to repeat a segment of the tape several times.
1. Go to the beginning of the program you wish to return to.
2. Press CLEAR to reset the counter to 0:00:00 while the counter is
displayed in the VCR's display panel or on-screen.
3. Continue playing the tape.
4. Press STOP.
5. Press SEARCH on the remote until the ZERO SEARCH screen
appears on the TV screen.
6. Press REVERSE (REV) to return to 0:00:00 on the tape.
7. Press STOP to stop zero searching.
PRO-TECT PLUS
TM
LOCKING
To disable the usage of the VCR, or to protect your timer recordings,
you can lock the VCR so that the buttons on the VCR or remote won't
work.
To Lock: Press and hold either the remote control's ON-OFF,
VCR1 or VCR2 button (whichever controls your VCR). LOCK
appears in the display when the feature is activated. LOCK appears
if you attempt to turn on the VCR while the feature is on.
To unlock the feature and turn on the VCR: Press and hold either
the remote's ON-OFF, VCR1, or VCR2 button (whichever VCR
button your VCR is set to respond to).
TRACKING
Your VCR has automatic tracking which removes the streaks or noise
from the picture. Automatic tracking is activated when you insert a
tape or turn on the VCR. Occasionally you may need to manually
adjust tracking, especially if the tape was recorded on a different VCR.
Use the TRACKING buttons to remove the streaks or noise. You can
also use tracking when you PAUSEa tape to reduce jittering of the
picture.
When you manually adjust the picture, automatic tracking is turned
off. To turn automatic tracking back on, eject the tape and re-insert it.
Tracking has no effect during recording--only playback.
58
ZERO SEARCH
Current tape counter is
2:17:25
Press REV to go to
0:00:00
Press SEARCH to exit
ZERO SEARCH
Searching for
0:00:00...
Press STOP to cancel
LockingYourVCR:
If a timer recording is programmed,
make sure yourVCR is turned off.
Locking yourVCR prevents theVCR
from being accidentally turned on.