Adding Or Removing Channels; Time And Date; Auto Clock Set Feature - ProScan PSVR85 User Manual

ADDING OR REMOVING CHANNELS
You may want to add or remove channels after you auto
channel search, especially if channels have weak signals or
content you don't want to watch. To achieve this:
1. Press MENU to display the VCR MAIN MENU
2. Press 4 to display the CHANNELS menu
3. Press 2 to display the ADD/REMOVE CHANNELS screen.
Use the CHANNEL + or
-
buttons on the remote or enter a
specific channel number with the number buttons to go to
the channel you want to add or remove.
u,
r
Selecting Channels
The CHANNEL + and - buttons
access those channels which are
active in yourVCR channel list.
You can still access channels not in
the channel list by using the
number buttons on the remote.
ADD/REMOVE CHANNELS
Channel 115
_s presently ADDED
Press CLEAR to remove
Press MENU to exit
ADD/REMOVE CHANNELS
Channel 115
is presently REMOVED
Press INFO to add
Press RENU to exit
Once you have reached your selection, the screen will tell
you if the channel is currently in your viewing list. Press
CLEAR to remove a channel. Press INFO to add a channel.
Once you are completed, you can press MENU to exit out of
the menus.
TIME AND DATE
The VCR gives you two ways to set the time and date; manually
and the Auto Clock feature. Using Auto Clock enabSes the VCR
to update the clock each time you turn off the VCR. The Auto
Clock feature updates the time for you automatically if your
local broadcasts offer AlISet time data.
If for any reason ti.me information cannot be automatically
downloaded, time and date information can always be entered
manually by using the on-screen displays.
AUTO CLOCK SET FEATURE
The Auto Clock feature is set to ON by default at the factory. In
the ON setting, the VCR looks for a channel carrying AIISet data
and updates the clock using the Coordinated Universal Time.
There are certain steps which are required, such as Auto
Channel Search, setting the time zone, and setting the daylight-
saving feature, before the Auto Clock feature works.
Auto Clock Info
With a cable box, theVCR will not
reset the clock after a power
outage unless the cable box is set
to the channel carrying the
broadcast signal.
If Auto Clock Set is unsuccessful,
try tuning theVCR (or cable box)
to a channel carrying AIISet time
information (usually PBS), then
turn theVCR off. If the time does
not set within I0 minutes, set the
time and date manually through
theTime menu.
Check local cable system orTV
stations for availability of channels
with AIISet information.
12