Adding Or Removing Channels; Time And Date; Auto Clock Set Feature - ProScan PSVR71 User Manual

ADDING OR REMOVING CHANNELS
You may want to add or remove channels after you auto channel
search, especially if channels have weak signals or content you don't
want to watch. To achieve this:
],
2.
3.
Press MENU to display the VCR MAIN MENU
Press 4 to display the CHANNELS menu
Press 2 to display the ADD/REMOVE CHANNELS screen. Use the
CHANNEL + or - buttons on the remote or enter a specific channel
number with the number buttons to go to the channel you want to
add or remove.
r
Selecting Channels
The CHANNEL + and - buttons acce
those channels which are active in
your VCR channel list.
You can still access channels not in
the channel list by using the number
buttons on the remote.
ADD/REMOVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove
Press MENU to exit
ADD/REMOVE CHANNELS
Channel 115
is presently REMOVED
Press INFO to add
Press MENU to exit
Once you have reached your selection, the screen will tell you if
the channel is currently in your viewing list. Press CLEAR to
remove a channel. Press INFO to add a channel. Once you are
completed, you can press MENU to exit out of the menus.
TIME AND DATE
The VCR gives you two ways to set the time and date; manually and
the Auto Clock feature. Using Auto Clock enables the VCR to update
the clock each time you turn off the VCR. The Auto Clock feature is
advantageous because it updates the time for you automatically.
AUTO
CLOCK SET FEATURE
The Auto Clock feature is set to ON by default at the factory. In the ON
setting, the VCR looks for a channel carrying XDS (Extended Data
Services) information and updates the clock using the Coordinated
Universal Time. There are certain steps which are required, such as
Auto Channel Search, setting the Time Zone, and setting the Daylight-
Savings feature, before the Auto Clock feature works.
F
Auto Clock Info
V_th a cable box, the VCR will not
reset the clock after a power outage
unless the cable box is set to the
channel carrying the broadcast signal
If Auto Clock Set is unsuccessful, try
tuning the VCR (or cable box) to a
channel carrying Extended Data
Servises (XDS) information (usually
PBS), then turn the VCR off. If the
time does not set within 10 minutes,
set the time and date manually
through the iTne menu.
Check local cable system or TV
stations for availability of channels
with XDS information.
12