ProScan PSVR75 User Manual page 8

STEP 8: FINISHING YOUR SETUP
Setting up your VCR with the QuickSet Guide can take you to many
different on-screen displays depending on the options you chose. For
example, after completing the auto channel search, you will see a
screen asking if you want to set up your VCR to control a satellite
receiver.
SAT SETUP
Would you like to set
up the VCR to control
a SAT receiver?
2 No
Of course, if you have no satellite receiver, you will select "NO" for
this screen. If you do have satellite service, make sure you see the next
section, Setting Up Your VCR, for important information about how
your VCR works with your satellite receiver before you complete the
next steps in the set up.
Another important series of steps in the QuickSet Guide is when you are
asked to set up your VCR Plus+ Gold programming system. Through
this system, your VCR automatically downloads information sent by
local broadcasters to assign channel numbers to corresponding stations
so you don't have to "map" the channels manually (tell your VCR which
station is on what channel). This step is identified by the screen:
SETUP
The rest of the setup
may take a few hours to
complete. Would you like
to continue setup?
I Now
| I_ III;111
If you select "Later" in the SETUP menu, then downloading the
information will occur overnight. This method allows you to watch
and record programming, through your VCR, but you cannot use the
VCR Plus+ system programming codes until the next day (after all,
your VCR doesn't know which channel is which yet).
SETUP
The rest of the setup
will run automatically
at night. Please turn
off the VCR before
midnight.
Press MENU to continue
Using the Arrow Buttons
You can use the arrow buttons
on the remote andVCg's front panel
to access and select menu items.
Remote Control
GUIDE INFO
MENU CLEAR
Front Panel
CHANNEL
TRACKING
CLEAR MENU INFO
c -I c--? c -I
CHANNEL
Use the up and down arrows to
highlight a menu item, then press OK
(MENU on the front panel) to select
or change the chosen item. You can
also set or change some of theVCR's
features (e.g., setting the clock) with
the arrow buttons.
Use the left and right arrows to move
from one location to another, such as
moving from hours to minutes when
setting up a timer program.
6