Set The Time Zone - ProScan PSVR75 User Manual

If your VCR Plus+ GOLD system fails to download all the necessary
information for any reason, then you will be shown the screen:
SETUP
Last automatic setup
was unsuccessful.
Would you like to:
I Try again
2 Finish setup manually
3 Cancel the Auto Setup
If you try the setup again, then you will have to wait for DOWN and
LOAD to stop flashing on the front panel to see if data was gathered
successfully.
If you choose to manually set up your channel mapping, turn to the
next section, Setting Up Your VCR, for more information.
If you cancel the automatic setup, you should turn off AUTO VCR
Plus+ or you will keep getting the prompt that automatic setup was
unsuccessful since VCR Plus+ GOLD attempts to download new data
every time the VCR is turned off. You can do this by going to the MAIN
menu, then choosing (4) for CHANNELS, choosing (4) for VCR Plus+
setup, and then choosing (2) to turn off the feature.
For More Information...
If you are having problems with any
QuickSet Guide element, including
VCR Plus+, you can always set up your
preferences manually. See the next
section, Setting Up the VCR, for more
information.
8