ProScan PSVR71 User Manual page 32

TIMER RECORDINGS
i - o - . _ - , " • ll_.._iI
2 Review Existing Progs.
3 Use VCR Plus+ Code
.
0 Exit
Select 1 to create a New Program.
How often should this
program record?
I [rl!!_[tl Ilillll[,
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
Cancel
4. Select how often you want the program to record.
Program 1 (One time)
Channel --
Start Time --:--
End Time --:--
Start Date --/--/--
Tape Speed SLP
Press MENU to cancel
5. Enter the data for the program with the number buttons.
.
The data includes the channel number (press INPUT to select the
line input), start time including AM or PM, and end time. The start
date is automatically entered based on the VCR clock. Both the
date and speed can be changed.
Review the information to make sure it is correct, and then press
MENU to save.
Program 1 (One Time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/18/99 Thu
Tape Speed SLP
I=SP 2=SLP
Press CLEAR to correct
Press MENU to save
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
Timer Recording Information
Clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record
the program.
The output of your cable box appears
in the Channel item of the timer
recording menu if you've set up the
VCR for a cable box for all channels.
PROGRAMS OVERLAP appears if you
have entered two programs where the
times overlap.
TIMER appears in the display when
you turn off theVCR and a timer
recording has been set. TAPE flashes if
there is no tape in theVCR.
For cable box or satellite receiver,
turn it on and tune it to the channel
you want to record before the
recording is to begin.
30