Energysaver; Front Panel (Vcr Display); Tape Speed - ProScan PSVR71 User Manual

ENERGYSAVER
By default, this VCR automatically turns off after two hours of
inactivity. Press 4 to change the time delay or to disable the feature.
• OFF: The VCR will remain turned on until you shut it off.
• 1:00, 2:00, or 3:00: The VCR turns off after one, two, or three
hours of inactivity.
Thirty seconds before shutting off, the VCR will warn you with a
screen reading, "The VCR will turn off in 30 seconds. Press any key
to cancel."
If you use the VCR's tuner instead of your TV to tune channels, you
may want to turn this feature off.
FRONT PANEL
(VCR
DISPLAY)
You can change the brightness level of the fluorescent display panel on
the front of the VCR. Press 5 to switch between the options.
• AUTO brightens the display when the VCR is on and dims the
display when the VCR is off.
• BRIGHT keeps the display bright.
• DIM keeps the display at a low brightness level.
TAPE SPEED
You can select a preferred tape speed for recording. The speed you
select appears in the display panel and in the timer and VCR Plus+
recording menus. Press 6 to switch between SP and SLP.
You can override the preferred tape speed:
• Pressthe SPEEDbutton on the remote.
• Set the tape speed in the timer or VCR Plus+ recording menu.
When you turn off the VCR, the tape speed reverts to the one you
have selected.
2O
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
slow motion, picture sesh, and
frame advance work well when you
play back tapes recorded in
this speed.
SLP(Super Long Play)
Gives three times the recording tim
of tapes recorded in Si_pecial effects
such as pause, slow motion, picture
seaK:h, and frame advance work well
when you play back tapes recorded in
this speed.
Recording Times
Cassette S P SLP
T-120 2Hr 6Hr
T-160 2Hr/40Min 8Hr