Table of Contents
Advertisement
In the preferences menu, press 1 to select the Remote Control feature.
Then press the VCR2 button to change.
PREFERENCES
2
Auto
Play:
ON
3
Auto
TV/VCR:
ON
4
EnergySaver:
2:00
5
Front
Panel:
AUTO
6
Tape
Speed:
SLP
7
Commercial
Advance
0
Exit
PREFERENCES
I _ ka nlioaa_aon
am_nam,,i,,dt
_a
2
Auto
Play:
ON
3
Auto
TV/VCR:
ON
4
EnergySaver:
2:00
5
Front
Panel:
AUTO
6
Tape
Speed:
SLP
7
Commercial
Advance
0
Exit
The VCR will only respond to the VCR2 button. To change the remote
setting back to VCR1, display the PREFERENCES menu, press 1 and
then press the VCR1 button on the remote.
AUTO
PLAY
This feature allows the VCR to automatically
start playing
when you
insert a tape with the safety tab removed,
Press 2 to switch between
ON or OFF,
Select ON if you want a tape with its safety tab removed to start
playing automatically when the tape is inserted.
Select OFF if you do notwant
a tape with its safety tab removed
to start playing automatically.
AUTO
TVIVCR
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode, when the VCR is turned on.
Press 3 to switch between ON and OFF.
Select ON if you want the VCR to switch to the VCR mode when
the VCR is turned on or a cassette is inserted. This only applies if
you connect the IN FROM ANT. and OUT TO TVjacks of your
VCR and TV and watch your VCR on channel 3 or 4 of your TV.
Select OFF if you want the VCR to remain in the TV mode. This is
useful if you watch your VCR on the TV's video input and you
don't want your antenna/cable signal interrupted by the VCR.
Auto
TV/VCR
PressingTV.VCR
on theVCR
(ANTENNA
on remote)
will still switch
between
theVCR
and TV modes.
VCR mode:
VCR indicator
in the display
panel lights.
TV mode: VCR indicator turns off.
19
Advertisement
Table of Contents
Need help?
Do you have a question about the PSVR71 and is the answer not in the manual?
Questions and answers