Changing The Signaltype - ProScan PSVR71 User Manual

AUTO CHANNEL SEARCH
What type of signal
are you using?
I Cable TV
2 Antenna
0 Cancel
¥I
4, Select one of the three AUTO CHANNEL SEARCH options,
• Cable TV searches for cable stations from a single channel
• Antenna searches for local broadcast stations on all channels
• Detect Automatically will make this decision for you
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels--this takes
about one to two minutes. When the scan is complete, the VCR
tunes to the lowest channel number available. At this point,
pressing CHAN + or - on the remote should only select active
channels.
r
Detect Automatically
A strong cable or antenna signal in
your area may causa_,uto Detect to
mis-detect. If this should happen,
select I or 2 for the system you have.
CHANGING THE SIGNAL TYPE
This feature is useful if your cable signal goes out; it allows you to
switch to a regular antenna for alternate television reception.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the Signal Type between Cable and Antenna.
When you are finished, press 0 to exit back to the Main Menu
and 0 again to exit to normal viewing.
11