Extron electronics TPS150 User Manual page 41

Command/response table for programming and operating the TPT150 (Cont'd)
Command
Input audio level
Adjust the input audio level
Leading zeros are required in the input number (
Two-digit numbers are required for the audio level variable (
The negative sign (–) is required for audio attenuation level variable values other than 00)
Example:
Increment the input audio level
Decrement the input audio level
Query the input audio level setting
Reset all inputs' audio levels
Output level
Adjust the audio output level
Two-digit numbers are required for the level variable (
The negative sign (–) is required for attenuation level variable values other than 00)
Example:
Increment the output level
Decrement the output level
Query the output level setting
Reset the output level
Program projector power and input command codes
Store ASCII code to a button
Example:
View a button's ASCII code
Example:
Brackets inserted using the insert brackets feature appear as brackets when you use view command.
Store hex code to a button
Example:
View a button's hex code
The insert brackets feature is not available for hex codes.
TPS150 Switching and Transmission System • Serial Communications
ASCII Command Response
(host to switcher) (switcher to host)
[VIN 0] [R0• •VIN
X2 X4 X1
).
X2
[VIN02–13] [R0•95•VIN02–13•]
[VIN +] [R0• •VIN
X2 X1
[VIN –] [R0• •VIN
X2 X1
[VIN ?] [R0• •VIN?•
X2 X1
[VIN@] [R0• •VIN@•]
X1
[VOL01 0] [R0• •VOL01
X5 X1
[VOL01–130] [R0•95•VOL01–130•]
[VOL+] [R0• •VOL+•]
X1
[VOL–] [R0• •VOL–•]
X1
[VOL?] [R0• •VOL?•
X1
[VOL@] [R0• •VOL@•]
X1
[PCL1 ] [R0• •PCL1
X6 X7 X1
[PCL103'S-video"] [R0• •PCL103'S-video"•] Program button 2 to send the
X1
[PCL1 ?] [R0• •PCL1
X6 X1
[PCL103?] [R0• •PCL103[S-video]] View button 3's command string
X1
[PCH1 ] [R0• •PCH1
X6 X8 X1
[PCH1020F] [R0•97•PCH1020F•]
[PCH1 ?] [R0• •PCH1
X6 X1
Additional description
0•] Set the input
X2 X4
specified value.
); use leading zeroes as required.
X4
+•] Increase the input
X2
by 1dB.
–•] Decrease the input
X2
level by 1dB.
] The audio input
X4
set to dB.
X4
Set all input's audio level
adjustments to their factory
defaults (0dB).
0•] Set the output level to a specified
X5
value.
), use leading zeroes as required.
X5
Increase the output level by 1dB.
Decrease the output level by 1dB.
] The audio output level is set to
X5
dB.
X5
Set the output level adjustment
to its factory default (0dB).
•] Program button
X6 X7
command string [S-video].
The ' and " characters insert the
delimiter brackets for devices
that require them.
?• ]
X6 X7
[S-video]. The ' and " characters
insert the delimiter brackets for
devices that require them.
•] Program button
X6 X8
Program button 2 to send the hex
command string 0F.
?• ]
X6 X8
audio level to a
X2
audio level
X2
audio
X2
audio level is
X2
code to .
X6 X7
code to .
X6 X8
4-15