Table of Contents
Advertisement
Operating
Instructions
To play
a tape
1. Turn on the TV and tune it to channel 3, 4, or TV's video input to see the
picture
from the VCR.
2. Insert a tape in the VCR.
VCR automatically
turns on. The cassette-in
K_ and E¥cRJ indicators
light.
Tape automatically
begins playback
if the safety tab on the cassette has been
removed.
Safety Tab
3. Press PLAY, if necessary.
Playback
indicator
• appears
in the VCR's display
panel.
4. If necessary,
press TRACKING up or down on the remote to remove any streaks
from the picture.
Details are on page 15.
5.
6.
7.
Press STOP/EJECT on the VCR or STOP on the remote.
Press REWIND on VCR or REW on the remote control.
The VCR will automatically
rewind
the tape if it reaches the end of the tape
during
playback.
While rewinding,
you can press POWER on the VCR or
OFF/POWER
on the remote and the VCR will turn off after rewinding.
Press STOP/EJECT
on the VCR to eject the tape once it is completely
rewound.
12
STOP/EJECT
Advertisement
Table of Contents
