Table of Contents
Advertisement
Operating
Instructions
To Play
a Tape
1.
Turn on the TV and tune it to cha_mel 3, 4, or TV's video input
to see the picture
from the VCR.
2. Insert a tape in the VCR.
VCR automatically
turns on. The cassette-in
n
indicator
lights, and the VCR indicator lights if the Auto TV/VCR feature
is set to ON. The tape automatically
begins playback if the
safety tab on the cassette has been removed
and the Auto Play
feature is turned
on.
Safety Tab
nE_0
_aEw
_.P_sE
3.
4.
5.
6.
7.
Press PLAY on the remote or PLAYoPAUSE on the VCR, if
necessary.
PLAY appears
in the VCR's display
panel.
Press TRACKING up or down to remove any streaks from the
picture, if necessary.
Details are on page 13.
Press STOP on the remote
or STOP,EJECT
on the VCR.
Press REW. REW will appear in the VCR's display panel.
The VCR will automatically
rewind the tape if it reaches the
end of the tape during playback.
While rewinding,
you can
press POWER and the VCR will turn off after rewinding.
Press STOP-EJECT
on the VCR to eject the tape once it is
completely
rewound.
Auto
Play Feature
This feature lets you tell the VCR whether
you want it to automatically
start playing
a tape that
is inserted
with the safety tab removed.
1. Press MENU on the remote
to see the VCR MAIN MENU on the
TV screen.
2. Press 4 to display the PREFERENCES
menu.
3. Press 1 to select Auto Play: ON or OFF.
• Select ON to have a tape with its safety tab removed
start
playing automatically.
• Select OFF if you do not want a tape with its safety tab
removed
to start playing automatically.
VCR
MAIN
MENU
1
Timer
Recordings
2
Set
Clock
3
Channels
4
Preferences
PREFERENCES
1
Auto
PLay:
ON
2
Auto
TV/VCR:
ON
0
Exit
12
Advertisement
Table of Contents
