Table of Contents
Advertisement
Types
of Recordings
Your VCR provides
different
types of recording.
These types are explained
in the following
sections:
Basic Recording
- Operating
Instructions
Recording
While You're Away
VCR Plus+ Recording
Timer Recording
Express Recording
Using Two VCRs for Copying Tapes
Recording
Speeds
_
SLP
Recording
Speed
SP (Standard
Play) gives the best quality
recording.
That is why most pre-recorded,
rental tapes
are recorded
in SP. Fewer programs
can be recorded
on the tape.
Special effects such as pause,
slow-motion,
picture
search and frame advance
work well in this speed.
LP (Long Play) gives twice the recording
time of tapes recorded
in SP. Special effects in playback
are not recommended
in LP.
SLP (Super Long Play) gives three times the recording
time of tapes recorded
in SP. Special effects
such as pause,
slow-motion,
picture
search and frame advance
work well in this speed.
Recording
Pause
This feature allows you to prevent
recording
short passages
of unwanted
material.
Press PAUSE during
recording
to stop and start recording.
_c] and
I! appear
in the VCR's display
panel.
The VCR will automatically
switch from pause to stop after a few minutes.
Basic
Recording
- operating
Instructions
To make
a recording
Turn on the TV and tune it to the VCR viewing
channel,
either
3, 4, or TV's video input channel.
1.
Insert a tape with safety tab in place.
The cassette-in
indicator
_
lights in the VCR's display
panel.
2.
Press VCR1 (VCR2) to set remote
to control VCR.
8.
If using one of the basic hookups,
make sure the rive_R1
indicator
appears
in the VCR's display
panel.
If not, press TV/VGR to turn it on.
4.
Select a recording
speed using T.SPEED.
The tape speed indicator
appears
in the VCR's display panel and on the TV screen.
5.
Select the channel
to be recorded.
If recording
from the AUDIO/VIDEO IN jacks, press INPUT
on the VCR to select L1 to record from back jacks or L2 to record from front jacks.
The channel number
or VIDEO1 (VIDEO2) appears
on the TV screen.
6.
Press REOORD.XPR
on the VCR or RECORD on the remote to begin recording.
indicator
appears
in the VCR's display
panel.
Watch
a TV channel
while
VCR
is recording
a different
channel
1. Follow steps 1 - 6 above.
2.
If using one of the basic hookups,
press W/VGR to switch to the TV channel.
The [_{g]indicator
will turn off in the VCR's display
panel.
3.
Press'IV
to set the remote to control TV functions
for a compatible
TV.
4.
Select the channel you want to watch with the TV's channel
buttons.
5.
Press STOP/EJECT
on VCR or STOP on remote when recording
is finished.
16
Advertisement
Table of Contents
