Table of Contents
Advertisement
Operating
Instructions
To, play a tape
1. Turn on the TV'and tune it to channel 3, 4, or TV's video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically
turns on. Tape automatically
begins playback
if the safety
tab on the cassette has been removed
and the Auto Play feature is turned
on.
The cassette-in
_3
and VCR indicators
light.
Safety Tab
3. Press PLAY, if necessary.
4. Press CHANNEL*TP_CKING on the VCR or TRACKING up or down on the
remote to remove any streaks from the picture if necessary.
Details are on
page 19.
5. Press STOP on the VCR or remote.
6. Press REWIND on the VCR or REW on the remote.
The VCR will automatically
rewind
the tape if it reaches the end of the tape
during playback.
While rewinding,
you can also press POWER and the VCR
will automatically
turn off after rewinding.
EJECT
STOP
7. Press E3ECT on the VCR to eject the tape once it is completely
rewound.
17
Advertisement
Table of Contents
