Resetting The Unit; Ics100 Control Program Help - Extron electronics SWP123 User Manual

Windows-Based Control Program, cont'd

Resetting the unit

1.
2.
3.

ICS100 Control Program Help

For information about program features, you can access the help program from
within the ICS100 Control program, select Help from the Help menu.
4-6
SWP123 Presentation Switcher • Windows-Based Control Program
From the Options menu, select Reset Unit.
To partially reset the switcher (restore all parameters to factory default,
except input volume settings) select Partial Reset from the pull-out menu .
To fully reset the switcher (restore all parameters to factory default) select
Full Reset from the pull-out menu.