Volume Commands - Extron electronics SWP123 User Manual

Remote Control, cont'd

Volume commands

Use these commands to control volume levels for both inputs and outputs. Input
levels are typically adjusted to minimize drastic changes in volume when switching
between inputs.
Command
Mute/un-mute
[MUTEx]
Adjust volume Level
[VOLoox]
Adjust volume level—simultaneous
[VOLx]
Set volume level
[VOLooxxx]
Adjust volume level—left
[VOLLoox]
Set volume level—left
[VOLLooxxx]
5-6 SWP123 Presentation Switcher • Remote Control
Description
Mutes or un-mutes Master Audio output.
x = 0 to disable mute and 1 to enable mute.
x = ? to request current state.
x = (left blank) to toggle current state.
Adjusts Master Audio or microphone volume level.
oo = 01 for Master Audio or 02 for microphone.
x = + (plus sign) to increment output volume.
x = – (minus sign) to decrement output volume.
x = @ to return output volume to factory default.
x = ? to request current volume level.
Adjusts Master Audio and microphone volume level.
x = + (plus sign) to increment output volume.
x = – (minus sign) to decrement output volume.
x = @ to return output volume to factory default.
x = ? to request current volume level.
Sets the volume level to a specific value.
oo = 01 for Master Audio or 02 for microphone.
xxx = -550 to 090
090 equals maximum gain (+9dB), 000
equals factory default (unity gain), and
-550 equals minimum gain (-55dB).
Adjusts Master Audio or microphone volume for left
channel.
oo = 01 for Master Audio or 02 for microphone.
x = + (plus sign) to increment output volume.
x = – (minus sign) to decrement output volume.
x = @ to return output volume to factory default.
x = ? to request current volume level.
Sets Master Audio or microphone volume for left channel.
oo = 01 for Master Audio or 02 for microphone.
xxx = -550 to 090
090 equals maximum gain (+9dB), 000
equals factory default (unity gain), and
-550 equals minimum gain (-55dB).