The Tracking - Mitsubishi HS-U560C Owner's Manual

Chapter4: UsingtheAdvanced Features UsingtheAdvancq_-d Playback Controls (cont.)
_Important:
1 Reverse high speed search
2 Reverse speed search
3 Reverse fast playback
4 Playback
5 Quickview
6 Forward speed search
7 Forward high speed search
...... "- -.i} sPvc.
I I I I-I I-I I-I ....... ; DTR
IH -! !.IM 1_1I_l S
DTR light
_Important:
After about five minutes in the still or slow-motion mode, the
VCR will automatically stop to avoid damage to the tape.
Depending on the type of TV you are using, tlae picture may
vibrate vertically when you pause the VCR's picture.
usingtheshuttleringwhenthetape is playing
You can also change the playback speed with the shuttle ring
without entering the PAUSE mode To do this, turn the shuttle
ring and hold it for the desired playback speed (see the diagram
to the left). If you release the ring, it will come back to the center
position, and normal playback will resume.
usingthe jogdialor ADJUST dial
You can use the jog dial to aclvance the tape frame by frame.
O While the VCR is playing a tape, press the PAUSE button to
freeze the picture on the screen.
O
Turn the jog dial or ADJUST dial clockwise to advance the
tape forward. Turn it counter-clockwise 'm reverse the tape.
The faster you turn the dial, the faster the tape will adwnce
forward or reverse.
To resume normal playback, press the PLAY button.
using still adjustment
Sometimes during still frame, the picture may vibrate or shake.
To correct this problem, turn the jog dial on the front panel while
pressing the ONE KEY PRC GRAM button. (Side-to-side vibration
cannot be corrected.)
Adjustingthe tracking
automatictracking
Your VCR automatically adausts the tape to give you the best
quality picture. When you press the PLAY button, the DIGITAL
TRACKING light will flash, ,showing that the VCR is adjusting
the picture. When the VCR has finished adjusting the picture, the
DTR light will. shine steadily.
A certain amount of"noise" in the picture o:r sound is normal
while the VCR is tracking a tape.
manual tracking
From time to time, you miglht play a tape that has excess "noise"
in the picture (often looking: like vibration c,r interference at the
top or bottom of the screen). To correct the picture, you will have
to manually track the tape.
While the tape is playing, press and hold the ONE KEY
PROGRAM button and turn the jog dial until the picture is
clear of excess "noise."
52