Using Special Effects; Control - Mitsubishi HS-U560C Owner's Manual

A CHAPTER FOUR
Usingthe Advanced Features
Now that you've learned about the basic operation of your VCR,
you're ready to discover its advanced features. You'll find infor-
mation on:
Using the AdvancedPlaybackControls
$ Using the AdvancedRecordingControls
$ SearchingTechniques
$ Using the ActiveA/V NetworkFeatures
Makinga Copy of a Tape
$ Using Child Lock
Before you use the advanced features, you should be familiar with
all of the VCR's basic operations, including viewing a picture
coming from your VCR (page 23), playing bazk a tape (page 25),
using the menus (page 29), and recording (page 38). If you find
any of the information in this section confl_sing, you may want to
review the previous chapters.
$ UsingtheAdvancedPlaybackControls
In this section, you'll discover some of the advanced playback
features of your VCR. These include:
• Using special effects,
• Adjusting the tracking, and
• Using the time counter.
Using special effects
You can use the shuttle ring and the jog dial on the front panel, or
the shuttle ring and ADJUST dial on the remote to control the
playback speed of the tape.
usingtheshuttleringwhenthetapeis paused
Turning the shuttle ring will change the playback speed in steps.
1 Reverse high speed search
2 Reverse speed search
3 Reverse fast playback
4 Reverse playback
5 Reverse slow-motion playback
6 Still
7 Slow-motion playback
8 Playback
9 Quickview
10 Forward speed search
11 Forward high speed search
O
O
While the VCR is playing a tape, press the PAUSE button to
freeze the picture on the ,;creen.
Turn the shuttle :ring and ihold it for the desired playback
speed (see the chart to the left). If you re] ease the ring, it will
come back to the center position, and the still (PAUSE) mode
will resume.
To resume normal playback, press the PI.AY button.
51