Table of Contents
Advertisement
Chapter 3: Operating YourVCR
Playing a Tal_e (cont.)
Jog dial
controlling vibration duringstillframe
If the picture
vibrates
during
still frame, turn the jog dial while
pressing
the ONE KEY PROGRAM
button
on the front panel
until the picture
is steady.
Selectingthe On-screenLanguage
You can set your VCR to display
on-screen
m_ssages,
menus,
and
functions
in one of three languages:
English,
Spanish,
or Frenc.h.
You should do this before you use the menus
or set any audio/
video functions.
Before you begin, you need to know:
•
how to view the p!Lcture coming from your VCR. (See page 23.)
Select
Language
Espanol
Fran_ais
Use
ADJUST
to
select,
and
ENTER.
O
O
O
Make sure you are viewing the picture
c.oming from your
VCR. Then, press the MENU button
on the remote
control. If
this is the first time the menus
have been used, you will see
the menu for selecting
an on-screen
language.
Turn the ADJUST
dial on the remote control to move the
cursor
next to the desired
language.
Turn the shuttle
ring right; on the remote
control. The menu
will change
to the "VCR Main Menu."
Press the MENU button
to exit the menus.
_Important:
The "Select Language"
menu is unique.
While all other menus
can
be accessed
at almost any time, the "Select Language"
menu will
not automatically
appear
again after it is first set. To see the
"Select Language"
menu,
press the TIMER RESET
button
on the
back of the VCR, then follow the procedure
on this page.
t Usingthe Audioand Video Functions
You can use the remote
control to select many of the VCR's audio
and video functions
and adjust
their settings
The VCR will
display the settings
on the television's
screen.
This section
will teach you about:
• Selecting
and ;adjusting
the audio and video functions,
• Descriptions
of audio functions,
and
• Descriptions
of video functions.
26
Hide quick links:
Advertisement
Table of Contents
