Maintenance - Maytag 23-11-2234N-003 User Manual

Maintenance ooooooooooooooooooooooooooooooooooooooooooo
Cleaning and Maintenance
• The unit has an air filter that must be cleaned with water every two
weeks and put back in the unit after it is completely dry.
• The air discharge grille can be cleaned with a rag or sponge, warm
water and mild detergent.
• Never use hot water, bleach, gasoline, acids, cleaning fluid or a
brush to clean the unit. This will damage the cabinet and the air
discharge area.
• Do not wash the unit with a hose.
Cleaning the Filter
Before using at the start of a season
• Clean tile air filter.
• Clean the cabinet and air discharge areas if necessary.
When transporting the unit or storing the
unit after the season
Drain excess water from the tank by placing a pan under
the lower drain valve, remove the drain plug, and let the
water drain into the pan. When the water stops draining
out, replace the drain plug, put the tube back in the clip
pointing up, and remove the pan of water. Operate the air
conditioner in fan mode to dry the interior of the unit.
Service Instructions
Read carefully before calling for service
If the unit fails to start
• Make sure tile unit is plugged into an outlet.
• Make sure the unit is not in the off position.
• Make sure the circuit breaker has not been tripped.
If the unit does not cool sufficiently
• Make sure the exhaust tube and nozzle fit correctly to each other and to the window adapter.
• Make sure the exhaust tube is not bent.
• Adjust the thermostat to a lower temperature.
• Make sure the exhaust tube and nozzle have nothing inside them.
If the unit is too loud
• Make sure tile exhaust tube and nozzle fit correctly to each ()tiler and to tile window mount.
• Make sure the exhaust tube and nozzle have nothing inside.
6