Safety Instructions - Maytag 23-11-2234N-003 User Manual

Important Safety Instructions ooooooooooooooooooooooo
RECOMMENDED CIRCUIT
WIRE SIZES
(As installed per building code) :
PROTECTOR SIZE
15 AMP
20 AMP
30 AMP
©
250V
15A
WIRE GAUGE
#14 MINIMUM
#12 MINIMUM
#10 MINIMUM
©
250V
20A
©
250V
30A
Power Supply:
115V, 60HZ
AC Only 1-Phase
Outlet Requirement:
3-Prong Grounding Type
125V, 15Amp
Minimum Wire Size:
#14 (A.W.G.) 3-Wire
Use CopperWire Only
Circuit Protector:
15 AmpTime Delay Fuse
or
Circuit Breaker
M
C) Three-prong grounding plug.
Do not alter plug end.
(_) Grounded three-prong wall
receptacle
(_) Single outlet grounding wall
receptacle
Electrical Shock Hazard _l_
• Plug unit only into grounded electrical outlet.
• Do not use an extension cord or plug adapter with this unit.
• Do not operate unit with filter removed.
• Failure to follow these precautions could result in electrical shock, fire
or personal injury.
• Do not alter cord or plug end. Do not remove warning label on cord.
A
Important Grounding Requirements
Your unit will operate on any 115 volt, 3-pronged (grounded), 60 Hz
circuit. A separate line is not required, but it is advisable not to overload
the circuit with heavy duty appliances such as washing machines, etc.
For your safety, this unit is equipped with a 3-pronged, grounding plug
and must be plugged into a properly grounded outlet. If your outlet is
not of the proper type, it is your responsibility to have the outlet and
wiring changed to the correct type. Do not cut off the third (grounding)
prong. Do not use an adapter.
For Your Safety
Do not store or use gasoline
or other flammable vapors and
liquids in the vicinity of this or any other appliance. The fumes
can create a fire hazard or explosion.
Do not introduce objects in the air discharge area. This could
cause permanent damage to your unit.
Do not pour liquids
on the air conditioner as this could cause a
malfunction. With the unit unplugged, use a damp cloth for
cleaning your unit. This unit
does not require
water or ice to
be
added.
• Avoid using strong
solvents to clean the air conditioner.
• Clean the air conditioner filter every two weeks to avoid
overheating caused by air obstruction. Do not operate without filter.
• Do not obstruct the air intake area of your air conditioner, as this
could cause overheating, thus activating the units security switch
and shutting off the unit.
• Do not block air circulation to exhaust tube, when in use.
• Do not block air flow inside with blinds, curtains, or furniture.
2