PEERLESS Pinnacle PI-199 Installation, Operation & Maintenance Manual page 16

DIAGRAMS FOR VERTICAL VENTING
STRAIGHT COUPLING
_J
MAINTAIN12", (18" FOR CANADA),_
MINIMUMCLEARANCEABOVE
NORMAL SNOW LINES.
I t
BO/LER
O T&P
RIGHT S_DE _IEW
3,,
INTAKE
STRA_HT
COUPUNG r J
3"
EXHAUST
ex_ust OUTU_T
,, 24"
MIN.
MAINTAIN 12_, (18" FOR CANADA),_
I "",
DO NOT EXTEND MORE THAN
24" ABOVE ROOF LINE.
BOILER
m
OT&P
R_HT SlOE VIEW
3,,
fNTAKE
STRAIGHT
COUpLiNG
3"
_T _TL_r EXHAUST
*'_[MPORTANT NOTE: All vent pipes must be glued, properly
supported, and the exhaust must be pitched minimum of a
1/4" per foot back to the boiler (to allow drainage of
condensate).
Figure 1 1: 3" Roof Vent with Tee (Intake) 6'
Coupling (Exhaust)
**IMPORTANT NOTE: All vent pipes must be glued, properly
supported, and the exhaust must be pitched minimum of a
1/4" per foot back to the boiler (to allow drainage of
condensate).
Figure 12: 3"" Roof Vent with 3" Concentric
Vent Kit (KGAVTO6OICVT)
13