PEERLESS Pinnacle PI-199 Installation, Operation & Maintenance Manual page 15

DIAGRAMS FOR SIDEWALL VENTING
BOILER
OT&P
_j===_
_"TS_EWW
EXTERIOR
WALL
ST_mHT
CcuPUNG --. --
1" MIN.
_ INTAKE
_12"_
BOILER
3" EXHAUST
R_"T _OZ ViEW
T_E {VERTICAL_ COUPLING TEE (VErtiCAL)
FRONTeLEVAT_N
qMULTIPLeVENTS)
EXTERIOR
WALL
1" MIN, EXHAUST
.... STRAIGHT
_ INTAKE
SlDEE_EVAXl0N
**IMPORTANT NOTE: All vent pipes must be glued, properly
supported, and the exhaust must be pitched minimum of a
1/4" per foot back to the boiler (to allow drainage of
condensate).
Figure 7: 3" Sidewall Vent with Tee (Intake) b
Coupling (Exhaust)
**IMPORTANT NOTE: All vent pipes must be glued, properly
supported, and the exhaust must be pitched minimum of a
1/4" per foot back to the boiler (to allow drainage of
condensate).
Figure 8: 3 _ Sidewall Vent with Tee (Intake) 8"
Coupling (Exhaust)
BOILER
OT&P
RIGHT SIDE ViEW
INTAKE
3"
coupu_
eX_XUST OUTLET EXHAUST
EXTERIOR
WALL
VI000
VENT KIT
BOILER
OT&P
RIGHT SIDE V_EW
EXTERIOR
WALL
--IMFOR_ANT _NTAKE LEG
MUST WE FACI_ Up**
"_r--_INTAKE
ST_,aHr EXHA T
¢_pu,o US
**IMPORTANT NOTE: All vent pipes must be glued, properly
supported, and the exhaust must be pitched minimum of a
i/4" per foot back to the boiler (to allow drainage of
condensate).
Figure 9: 3 _ Sidewall Vent with VlOOO Kit
**IMPORTANT NOTE: All vent pipes must be glued, properly
supported, and the exhaust must be pitched minimum of a
1/4" per foot back to the boiler (to allow drainage of
condensate).
Figure 10:3 _ Sidewall Vent with 3 _ Concentric
Vent Kit (KGAVT06OICVT)
12