Operating Method; How The Machine Makes Ice - NORPOLE EWCIM90S User Manual

Operating Method
1. Switch on the Power switch on the
front panel. The light will be on. The
ice maker will start working
automatically and feeding water.
2. After the first feeding of the water,
the machine will automatically go to
the ice making stage, and the sound
of water spraying will be heard.
3. Ice will be harvested to the ice
storage bin. When the storage bin is
filled with ice cubes, the ice maker
will automatically stop working. The
machine will restart making ice once
the storage bin is less than full.
/
/
u...2J
4. Excess water will flow through the
drain oulet at the back of the machine and empty into the floor drain.
IMP OR TANK
- Although the unit has been tested at facto1 T, due to long-term transit and storage,
the first batch of cubes must be discarded.
- Never turn the water supply tap offwhen the icemaker is working.
How the Machine Makes Ice
There are two distinct cycles: freezing and harvest.
During the freezing cycle, water is sprayed against the evaporator surface.
In the harvest cycle, the ice is released and water enters the machine. A complete
cycle takes about 20 minutes.
Freeze: During the freezing cycle the compressor is pumping refrigerant, the fan
motor is blowing air, and the water pump is circulating water. When the
evaporator surface gets to the setting temperature, the ice maker stops the freezing
cycle and begins the harvest.
Harvest: During the harvest cycle the compressor is still operating, but the water
pump has stopped. Two other components have been energized: the hot gas valve
15