Table of Contents
Advertisement
Water is leaking
from the unit.
The body of the
ice maker is
electrified.
Scales occur
frequently inside
the machine.
Noise during
operation
The
downcomer
doesn't leak.
Harvesting
ice is
difficult
The ice maker
stops suddenly
while making ice.
Cubes are too big.
A few water drops fall to the
floor when you open the door
to take out ice from ice
storage bin.
Water supply connection
leaking.
Nut of the water drain hole
leaking.
Drainpipe connection
leaking.
The grounding line isn't in
the socket.
The lines are creepage.
The hardness of the water is
too high.
The sprinkler is blocked.
partially
The
sprinkler
pressure
of
spray isn't enough.
The feet are not leveled and
locked
Certain sounds are normal.
The water line blocks
The water supply tap is turn
off.
The ambient temperature
and
water temperature
is too low
The electricity is off.
The room temperature
is out
of the stated range.
The fuse is brown.
The
voltage
of
the power
supply is low.
The ventilation louvers are
covered.
The ambient temperature
and
water temperature
is too low.
Normal condensation
on the door or some
water together with ice. Take care when you
take out ice.
Tighten fitting. See "Connecting
the Water
Line".
Tighten the nut.
Tighten fitting. See "Connecting
the Drain".
Use the socket meeting the required
electrical standard.
Adjust, reconnect/replace
lines
Use a water-softening
device installed in
front of the water inlet valve.
Clean it; see "Interior Cleaning".
Check.the
water
quality
The water
line
may be blocked
Level and lock the feet. See "Leveling the
Ice Maker".
See "Normal Sounds".
Clean
it, see user
and care
manual
"ice
making system cleaning"
Turn on the water supply tap.
Adjust the temperature.
Reconnect the power supply line.
Cut off the electricity;
let the ice maker stop
working till the temperature returns within
the stated range.
Replace fuse.
Add manostat.
Remove the obstruction.
Adjust the temperature.
28
Hide quick links:
Advertisement
Table of Contents
