Electrical Requirements - NORPOLE EWCIM90S User Manual

Normal operating ambient temperature should be betweenl3°C2 to 32°C.
Normal operating water temperature should be between 5°C and 25°C.
Operation of the icemaker for extended periods out side of these normal
temperature ranges may affect production capacity.
The
plug must
be accessible after installation.
In general, it is always a good idea to filter the water. A water filter, if it is of the
proper type, can remove taste and odors as well as particles. Where water is very
hard, softened water may result in white, mushy cubes that stick together.
Deionized water is not recommended.
The ice maker must be installed with all electrical, water and drain connections in
accordance with state and local codes.
The unit should be located on a firm and level surface. It is important for the ice
maker to be leveled in order to work properly. If needed, you can adjust the height
of the ice maker by revolving the feet. See the "Leveling the Ice Maker" section.
A standard electrical supply (ll5VAC, 60Hz), properly grounded in accordance
with the National Electrical Code and local codes and ordinances is required.
IMPORTANT: Do not kink or pinch the power supply cord between the ice maker
and cabinet.
Electrical Requirements
Electrical Shock Hazard
Plug into a grounding wall outlet.
Never remove the ground prong.
Never use an adapter.
Never use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Before you move your ice maker into its final location, it is important to make
10