Electrical Requirements - NORPOLE EW CIM65S User Manual

•
A standard electrical supply ( 1 1 5 VAC only, 6 0 Hz, 1 5 A) , properly grounded in
accordance with the National Electrical Code and local codes and ordinances is
required.
•
IMP ORTANT: Do not kink or pinch the power supply cord between the ice maker
and wall or cabinet.
El ectrical Requirements
P lug into a grounded 3 -prong outlet.
Never remove the grounding prong from the plug.
Never use an adapter.
Never use an extension cord.
Failure to follow these instructions can result in fire,
electrical shock or death.
Before you move your ice maker into its final location, it is important to make sure you
have the proper electrical connection.
A standard electrical supply ( 1 1 5 VAC only, 6 0 Hz, 1 5 A) , properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is required.
It is recommended that a separate circuit, serving only your ice maker, be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
The fuse ( or circuit breaker) size should be 1 5 amperes.
Recommen d ed g roun d in g meth od
For your personal safety, this appliance must be grounded. This appliance is equipped
with a power supply cord having a 3 -prong grounding plug. To minimize possible shock
hazard, the cord must be plugged into a mating 3 -pronged and grounding-type wall
receptacle, grounded in accordance with the National Electrical Code and local codes and
ordinances. If a mating wall receptacle is not available, it is the personal responsibility of the
customer to have a properly grounded, 3 -prong wall receptacle installed by a qualified electrician.
El ectrical S h ock Haz ard
10