Memorizing Channels - Mitsubishi CS-35707 Owner's g Manual

Memorizing channels
You can use the menus to automatically memorize the channels
your TV can receive. Once channels are memorized, you can ,_can
through them using the channel controls on the remote control and
control panel.
Setup Timer Channels Captions Parent Lock I_
Press ENTER tomemorize channels, set t hetime, oruse AV Network
© •
I AutoSet
Ignore
Daylight
Savings
Memorize A Memorize B ClockSettings
Press ENTER t omemorize channels a vailable onAntenna A
I Cable I
Airantenna _ AutoSet
@ O I ignore
Daylight
Savings
Memorize A Memorize B Clock Settings
Press ,Lv toselect c onnection forAntenna A ,thenpress ENTER
AutoSet
@ 0 I ignore
Daylight
003
Savings
<_ Memorize A Memorize B ClockSettings
p
Memorizing channels forAntenna A
O Press the MENU button on the
remote control. The main menu
appears on the screen.
O Use the ADJUST left & right
buttons to select "Setup." Press
ENTER.
You will see the "Setup" screen.
Next, select the terminal (Ant-A
or Ant-B) to which you attached
an antenna or (;able from your
cable system. Use the ADJUST
left & right buttons to select
"Memorize A" or "Memorize B."
Press ENTER.
Use the ADJUST up & down
buttons to choose the type of
antenna yo_L connected: Cable
or Air antenna Press ENTER.
O
The channel memorization
starts. You can stop charLnel
memorization at any time by'
pressing CANCEL.
When a channel is added to
memory, it displays in green; a
channel that is not added
displays in red.
_>Important:
Channel controls work only after channels are memorized. After
memorizing, use the channel controls (CHANNEL) to advance
sequentially to the next memorized channel. Use the number
buttons to select individual channels.
54 Chapter 3: Operating Your TV