Settingthe Timer - Mitsubishi TS-5057 Owner's Manual

Setting the timer
Important:
This special feature allows you to program the Projection TV to
turn on automatically at a preset tirae. To set the timer:
a,_ TV Main Menu
Q First Time Set-Up
Customize Viewing
[_ Advanced Features
Use ADJUST to select.
Then press ENTER.
Press MENU to exit menus.
O Press the MENU button on the
remote control. The TV Main
Menu will appear on the screen.
O Se. ect "Advanced Features"
using the ADJUST buttons;
then, press the ENTER button.
_ Advanced Features
1_ Set the timer
Use parental lock
Use Super Quick View
Use Advanced PIP
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
TV Main Menu.
O You will see the "Advanced
I eatures screen. Select"Set
the timer" using the ADJUST
bu Ltons; then, press the ENTER
button.
,_ Set the timer
• Day --
Start time - -
Input - -
Channel - -
Use ADJUST to select.
Then press ENTER.
Press MENU to return to
Advanced Features Menu.
Use the ADJUST buttons and
the ENTER button to set Day,
_ •
,_tart time, Input and Channel.
After setting the timer, make sure
that the program timer indicator
is l:it ap. The indicator will light in
orange when the TV is turned on,
and l!ght in red when the TV is
turned off. The indicator will not
light up when using the menus, or
when you have locked the TV.
When you press the CANCEL
button while setting the timer, the
cursor will move to the previous
item. To clear the timer, press the
CANCEL button with the cursor
at the "Day" position.
When the timer turns the Projection TV on, the display will flash
as a warning. If you do not press any ':_V function buttons for about
5 minutes, the Projection TV will automatically turn off. Press a TV
function button (such as the display button) to keep the Projection
on and turn off the flashing display.
70
Chapter 3: Operating Your Projection TV