The On-Screen Displays - Mitsubishi TS-5057 Owner's Manual

Problems Possible Solutions For More Information
On-screen displays appear
each time you adjust a
function.
• This is part of the normal
operation of the Projection
TV.
See "Understanding the On-
Screen Displays" in Chapter
4 for a fifll explanation of
the on-screen displays.
There's no sound even when
the volume is turned up.
Check that the MUTE
button isn't on.
The Projection TV's recep-
tion mode may be set to
"separate audio program"
(S.A.P.).
See "Remote control buttons
and functions" in Chapter 1,
which explains the location
and function of the MUTE
button.
See "Adjusting the sound" in
Chapter 3, which exp]lains
how to _,elect the appropri-
ate reception mode.
• You forget the code you used • Use the alternate procedure
to set the parental lock. that doesn't require the use
of the code.
• See the Appendix_, "Proce-
dure for Bypassing the
Parents] Lock."
You can't program the
Projection TV to turn on
automatically.
The Projection TV may be
locked.
See "Using the parental
lock" under "Using the
Advanced Features" in
Chapter 3.
The sound doesn't match the
image on screen.
The Projection TV's recep-
tion mode may be set to
"separate audio program"
(S.A.P.).
See "Adjusting the sound" in
Chapter 3, which explains
how to select the appropri-
ate reception mode.
There is a large black
rectangle on the screen.
The Projection TV has been
set to "text" mode, but there
is no text information being
broadcast.
• See "Using the closed
capti[on decoder" under "Get-
ting started" in chapter 3.
Troubleshooting 97