Basic Connections; Decoder Box - Mitsubishi TS-5057 Owner's Manual

Projection TV + antenna or cable without a
decoder box
equipment you will need
If you have a standard 75-ohm coaxial cable, you will not need
additional equipment. If your antenna has two leads (called fiat
twin leads), you'll need:
• One 75-300 ohm transformer.
Cable
,-- - Flat Twin Leads
O
0 0
>__
Trans of_rmer
Projection TV
Rear Terminals
t_,_r.2 INPUT-I
OUfrUlr _UT
Basic Connections 27
connecting a cable
0 Push or screw the end of the cable onto the ANT-A terminal on
the Projection TV.
connecting an antenna with flat twin leads
Use a screwdriver to connect the ],_ads to the transformer.
Push or screw the transformer onto the ANT-A terminal on the
Projection TV.