Mitsubishi TS-5057 Owner's Manual page 32

Projection TV + separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought in_o your home with two
separate antennas, you'll need to combine the antennas in order to
connect them to the Projection TV. To do this you will need a UHF/
VHF combiner. (There are different combiners for different kinds of
leads. Check with your local electronics store for the kind of com-
biner you need.)
Pictured to the right is a
standard combiner.
To connect separate UHF and VHF antennas to you:r Projection TV:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
Press the combiner onto the ANT-A terminal on the rear of the
Projection TV.
\\ I1_
\\ IMI
VHF Antenna UI4F Antenna
(Channels2-13) (Channels14-69)
nil/ ,.......
_\\\\\\V
Flat Twin Lead
Extemal
Antenna
or Cable
Flat Twin Lead -
300 Ohm to
75 Ohm
O Combiner _
Back Side
Projection TV
Rear Terminals
@I@®P
: : : : :
@ @ @1=
@le®j
R o
I
INPUT-_ *NPUT,I
I r_>UT
30 Chapter 2: Connecting Your Project:ion TV