Table of Contents
Advertisement
WhilethePIP image is onthe screen:
• ThePIP functionbuttons(SOURCE VCI_-CH, ENTER,right/
left, adjustup/down, PAUSE) will all workastheydowith
standardPIP.
• TheCHANNELandnumber buttons(0-9)will automatically
controlthe smallPIPimage. Y oucannotchange channels onthe
mainimage.
Whenyoupressthe PIPbuttononthe remote to turn off thePIP
image:
• CHANNEL,the number buttons,andall otherfunctionswill
worknormallyagain.
_Important:
Important:
_>Important:
If
you turn
off the Projection
TV while it is set to Input-l,
it will
return
to the last channel
you viewed on An':enna-A
or Antenna-B
when you turn the Projection
TV back on.
If you leave the Projection
TV turned
on, set to Input-l,
but the
Projection
TV is not receiving
a signal on Input-l,
it will automati-
cally turn
off after five minutes.
(If you use a TV menu during
this
time, the Projection
TV will turn off five minutes
after you stop
using the menus.)
You should not press
the PIP button
while you are watching
a
channel
that is not receiving
any broadcasts.
You will not be able to
see the small PIP image,
and you will not be able to change
chan-
nels on the main image. You may need to turn off the Projection
TV
and turn it back on, change
to a channel
that is receiving
a broad-
cast, and begin again.
Using
the Active A/V Network
Feature
93
Advertisement
Table of Contents
