Table of Contents
Advertisement
®
®
®
®
,3
®
®
©
@
S-VIDEO
input
terminal
Use to connect the video output
of a Super VHS (S-VHS) VCR
to the Projection
TV. If you connect
an S-VHS VCR to this
terminal,
Input-3
will automatically
be the input
for viewing
an
S-VHS VCR.
video
input
terminal
Use to connect the video output
from a standard
VCR or
another
component
to the Projection
TV.
audio
input
terminals
Use to connect the audio output
from a VCR or other
equip-
ment.
input
button
(INPUT)
Use either
button
to select the input
source to be viewed:
• Antenna
A,
• Antenna
B, or
• Input-l,
2 or 3.
volume
controls
(VOL)
Press the • button
to turn
up the volume and the • button
to
turn
down the volume.
channel
controls
(CHANNEL)
Use the • button
to switch to a channel
with a higher
number
and the • button
to switch to a channel
with a lower number.
A/V reset
button
(AN RESET)
Press to reset all audio and video functions
to their
normal
level or setting
except for volume,
reception
mode (Stereo/SAP/
Mono), Speaker
on/off, monitor
out (variable/fixed)
and closed
captioning.
This button
also resets
the clock.
menu
button
(MENU)
Use this button
to display
the on-screen
menu system,
which
gives you access to your Projection
TV_s features.
cancel
button
(CANCEL)
This button
is used to cancel a channel
number,
to erase the
parental
lock code, to clear a channel
from super quick view
memory,
and to clear the settings
of on-screen
menus.
enter
button
(ENTER)
Use this button
after selecting
a channel
number
or after
selecting
an item from the on-screen
menu
system.
You will
also use this button
with the PIP function.
Overview
of the Control
Panel
13
Advertisement
Table of Contents
