Mitsubishi HS-U270 Owner's Manual page 30

Chapter3: Operating YourVCR UsingtheMenusto Setthe Time(cont.)
B=-, I;_
ODaylisht eavinse (ON
0 Month June
OYear _ I_96 1
--16 Sunday--
OTime I 1 _- : OO'p m
)
)
ODaylight savinss (ON)
Month June
Year 1996
ODate
16
S_nclay,
ODaylisht savinss (ON)
0 Nonth June
0 Year 1996
ODate 16
Sunday
7+>,<.m
[_]_dfl_-_
_Important:
_Important:
O Press the ADJUST buttons to set the ,date. Press the ENTER
button.
O
The hour numbers and the am/pro indicator will be blinking.
Press the ADJUST buttons to set the ihour and am/pro at the
same time. The ADJUST + button moves the clock fo:_vard;
the ADJUST - moves the clock backwards.
Press the ENTER button.
O
The minutes numbers will now be blink!ng. Press the AD-
JUST buttons to set the minutes. When you have set the
correct time, press the ENTER button. The display will
return to the "First Time Set-Up" menu and the clock will
start running.
Press the MENU button once to return to the '_VCR Main
Menu"; press the MENU button again to turn off the menus.
If youwantto adjusttheclockmanually for Daylight . €;aving Time
After you have displayed the "Set the Clock:" menu, make sure
that the words "Daylight savings" is highlighted. Then press the
ADJUST buttons to select ON or OFF. If you select ON, the VCR
will set the clock forward one hour. If you select OFF, the VCR
will set the clock back one hour.
If you want the VCR to adjust the clock automatically for Day-
light Saving Time, set "Auto D.S.T." of the ",gustomize cb.oices"
menu to ON.
If you setthe "Auto D.S.T."ofthe "Customizechoice_"menuto ON,
Your VCR will change automatically the clock from 2 AM: to 3 AM
on First Sunday in April and turn the "Daylight savings" setting
to ON; your VCR will change the clock from 3 AM back to 2 AM
on Last Sunday in October and turn the setting to OFF. This
means if you are currently following Daylight Saving Time, "ON"
will be displayed; otherwise, "OFF" will be displayed. (You
cannot change the "Daylight savings" sett£ni_ manually.)
If any time you adjust this setting, check your programmed
recordings to be sure they are set to the correct time.
28