Connecting Peripheral Equipment - Philips 28PW6332 - annexe 1 Handbook

Connecting peripheral equipment

The
The
For further information, see glossary (p. 22).
Video recorder
• If your video recorder has a euroconnector socket, carry out the above
connections. Euroconnector sockets ensure better picture quality.
• If your video recorder does not have a euroconnector socket (or if this is already
being used by another device), then the only connection possible is via the aerial
cable.Your video recorder is then considered as a TV programme by your TV set.You
will therefore need to tune in your video recorder's test signal and assign it
programme number 0 (see manual store chapter, p. 5).
To reproduce the video recorder picture, press the
Refer to your video recorder's operating instructions concerning the test signal
(the video recorder must be equipped with an HF modulator).
Connecting other equipment
(satellite receiver, decoder, CDV/CDI, games...)
Connect to socket
18
socket has audio and video inputs/outputs and RGB inputs.
EXT1
socket has audio and video inputs/outputs and S-VHS inputs.
EXT2
EXT1
...with Decoder
(or to if it produces a
EXT2
key.
signals).
S-VHS