KitchenAid KESC307 Use And Care Manual page 17

'_._sing and Caring for Your Cooktop
5. If the surface light still does not work,
you may need to replace the starter. The
starter is a knob-shaped part located on
the right side of the backguard, under the
light tube.
To remove and replace the starter, first
remove light tube. Push starter in and
turn approximately 90 ° counterclockwise.
Pull starter out of recessed area. You can
find replacement starters at stores that
sell fluorescent light tubes.
6. Replace glass and close the top panel.
Plug in appliance or reconnect at main
power supply.
17