Table of Contents
Advertisement
Available languages
Available languages
SIDE BURNER
CAPS AND GRATE
Cleaning Method:
•
Clean with a brass bristle brush.
•
Wash grate using mild detergent, warm water and degreaser.
•
Rinse with clean water and dry with soft, lint-free cloth.
•
KitchenAid ® Stainless Steel Cleaner and Polish Part Number
4396920 (not included) or KitchenAid ® Stainless Steel Wipes
Part Number 8212510 (not included):
See "Assistance
or Service" section to order.
KNOBS AND FLANGE AREA AROUND
KNOBS
IMPORTANT: To avoid damage to knobs or to flange area around
knobs, do not use steel wool, abrasive cleaners, or oven cleaner.
Do not soak knobs.
Cleaning
Method:
•
Mild detergent, a soft cloth and warm water.
•
Rinse and dry.
CONTROL
PANEL GRAPHICS
IMPORTANT: To avoid damage to control panel graphics, do not
use steel wool, abrasive cleaners or oven cleaner.
Do not spray cleaner directly onto panel.
Cleaning
Method:
•
Clean around the burner labels gently; scrubbing may remove
printing.
•
Mild detergent, soft cloth and warm water.
•
Rinse and dry.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Nothing will operate
Is the main or regulator gas shutoff valve in the off
position?
See the Installation Instructions.
Is the gas supply properly connected?
Contact a trained repair specialist or see Installation
Instructions.
Electrical
Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
Is the 5,000 mAmp power supply cord unplugged?
Plug into a grounded 3 prong outlet.
Has a household
fuse blown, or has a circuit breaker
tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
"Troubleshooting."
It may save you the cost of a service call. If
you still need help, follow the instructions
below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement
parts
If you need to order replacement
parts, we recommend
that you
use only factory specified parts. These factory specified parts will
fit right and work right because they are made with the same
®
precision used to build every new KITCHENAID
appliance.
To locate factory specified parts in your area, call us or your
nearest KitchenAid designated service center.
22
Advertisement
Table of Contents
