KitchenAid KBNS361TSS00 Installation Instructions And Use & Care Manual page 14

5.
Place warming shelf on brackets as shown.
B
i
ilil
A ..................
A
A. Warming shelf brackets
B. Warming shelf
6. Attach condiment shelf to the inside of the left cabinet door.
LP Gas:
IMPORTANT: A 20 Ib LP gas fuel tank must be purchased
separately.
IMPORTANT: The gas pressure regulator/hose assembly
supplied with the grill must be used. Replacement gas pressure
regulator/hose assembly specific to your model, is available from
your outdoor grill dealer.
To Install the 20 Ib LP Gas Fuel Tank:
1. Open cabinet doors.
2. Press the locking tab on the tank tray and pull out the tray.
B
A. Attachment holes
B. Condiment shelf
7. Dispose of/recycle all packaging material.
Make Gas Connection
Explosion Hazard
Securely tighten all gas connections.
if connected to LP, have a qualified person make sure
gas pressure does not exceed 11" (28 cm) water
column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
If converting to Natural gas, see conversion kit requirements in
the "Gas Supply Requirements" section. Follow instructions
included with kit.
3.
4.
5=
A. Tank tray locking tab
Place the 20 Ib LP gas fuel tank bottom collar into the
mounting hole in the tank tray.
Tighten the locking screw against the bottom collar of the
20 Ib LP gas fuel tank to secure.
A
B C
A. Locking screw
B. Mounting hole
C. Bottom collar
Screw the gas pressure regulator/hose assembly to the
20 Ib LP gas fuel tank as shown.
B
A .......
A. 20 Ib LP gas fuel tank
B. Gas pressure regulator/hose assembly
6. Turn on the gas supply. Wait a few minutes for gas to move
through the gas line.
7. Test all connections by brushing on an approved
noncorrosive leak-detection solution. Bubbles will show a
leak. Correct any leak found.
8. Slide tank tray back into the cabinet and lock into place.
14