Table of Contents
Advertisement
Installation, cont'd
6.
Remove the plastic strips that protect the flanged edges of
the top of the surface enclosure. If a sticky residue
remains, remove it with an appropriate metal cleaning
product.
Do not use isopropyl alcohol or other solvents to
CAUTION
clean the HSA. Strong solvents will ruin some
finishes.
7.
Carefully lower the HSA enclosure into the hole to test the
fit. If necessary, remove the enclosure and use a file or
rasp to enlarge or smooth the edges of the opening.
8.
From the underside of the table, bolt the clamshell to the
enclosure with two bolts of optimum length (included)
(figure 2-3).
9.
Peel any remaining protective coating from the enclosure.
HSA 822 Hideaway
®
Enclosure • Installation
2-6
IN PU
SE
LE
T
CT
CO
AU
MP
UT
DI O
ER
Power Cord
RJ-45 Connectors
Figure 2-3 — Mounting the HSA 822 enclosure
®
HSA 822 Hideaway
Enclosure • Installation
HSA 822
Mounting
Surface
AAP Cables
Clamshell
Flat Washer
Full Thread
Mounting Bolts
2-7
Advertisement
Table of Contents
